POS Board 32GB eMMC for Pharmacy Counter, WF-P3399, AndroidSBC, Vienna

TL;DR: POS Board 32GB eMMC for Pharmacy Counter

AndroidSBC peripheral desk: printer, scanner, cash drawer and payment reader driver SDK declared production-ready serving Vienna, Austria. The WF-P3399 POS Android motherboard spans the dual-screen high definition POS with 4K promotion wall and eleven sister models in the WF-P series, all built on the RK3399 dual Cortex-A72 1.8GHz plus quad Cortex-A53 SoC with the ARM Mali-T860 MP4 GPU, HDMI 2.0 plus eDP output at 4K@60Hz, and Android 11 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-P family from the Longgang source factory in Shenzhen to Vienna and Austria importers who run supermarket checkout lanes, convenience counters, restaurant tills, hotel front desks, fuel forecourt cabinets and unattended payment kiosks.

About AndroidSBC and the POS Android Motherboard Family

AndroidSBC builds POS boards for the way retailers actually buy: one pilot batch, then a frame agreement, then staggered releases against a call-off schedule. The WF-P family supports that pattern because the BOM is frozen per lot and the Vienna partner can re-order the same configuration eighteen months later and receive the same board. Each production lot is burned in for 72 hours with the display, the touch panel and the printer loop running, and the serial number is logged against the test record so a Vienna partner can trace a single board back to its run.

WF-P3399 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-P3399 (dual-screen high definition POS with 4K promotion wall) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Austria importers sourcing the WF-P family, the WF-P3399-A variant is the typical configuration for the flagship store checkout plus media wall use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing POS Android Motherboards for Austria Buyers

The second problem is the peripheral stack. A POS board is useless if the cash drawer does not fire, if the barcode scanner needs a driver nobody has, or if the customer display shows the cashier screen instead of the promotion loop.

Staged OTA is shipped as a tool, not a promise. A Vienna chain can push an update to a pilot group of lanes first, hold the rest, and roll back the image if the pilot shows a printer regression, all from the same console. AndroidSBC confirmed on September 23, 2026 that 69700 boards for Vienna were on the water via Hamburg - Shenzhen, with the peripheral validation report from the Longgang bench included in the packing list.

Competitive Comparison: WF-P3399 vs Competing POS Android Boards

What follows is not a spec-sheet comparison. It is the four questions a Vienna chain asks after its first failed rollout.

• Platform breadth: twelve models on eight chips (RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618, T527), so {city} integrators can move between tiers without changing the driver stack or the mounting pattern.
• Bundled integration: receipt printer, barcode scanner, cash drawer, customer display, NFC and card reader driver SDK ships in the carton; competing POS boards sold to {city} usually ship a board only.
• Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the {city} integrator to obtain.
• Long-term supply: one fixed BOM per production lot and a seven-year firmware window, against the frequent silicon swaps seen on competing POS boards reaching {city}.

Global POS Terminal and Smart Checkout Market Trends

Unattended and self-service formats are the segment where the board specification bites hardest. A cabinet on a forecourt or in a store entrance has no staff to reset it, so the dual-screen high definition POS with 4K promotion wall has to hold a watchdog, an RTC and a clean auto-recovery path.

• Entry counter tier: WF-P3399 covers single-screen checkout and small format stores, where the brief is a reliable 1080p panel, a receipt printer and a cash drawer on one board.
• Dual-screen mainstream tier: WF-P6180 drives the cashier screen and the customer display independently, which is the configuration most restaurant and supermarket rollouts standardise on.
• AI and unattended tier: WF-P5270 carries the NPU, the wide temperature window and the watchdog behaviour that face payment counters and outdoor cabinets require.

The Austria demand curve rewards the vendor who can hold a configuration. AndroidSBC publishes the WF-P price list, MOQ and lead time because a Vienna partner is budgeting a multi-year refresh, not a single purchase order.

Partner Success Story: Siam Counter Holdings (convenience and pharmacy POS integrator)

A Siam Counter Holdings rollout in the Southeast Asian retail segment shows how the WF-P POS board family works in practice for Vienna integrators. Siam Counter Holdings rolled out 69700 WF-P boards across 210 convenience and pharmacy counters.

• OEM relationship: AndroidSBC private-label SKU shipped with Siam Counter Holdings branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3576 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering thermal printer, receipt printer, barcode scanner, QR scanner, cash drawer, customer display, NFC reader, RFID reader, magnetic stripe reader, IC card reader, PIN pad, fingerprint reader and face recognition camera.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus TKK / RTR conformity, all bundled into the Shenzhen source-factory shipment.

As Siam Counter Holdings Chief Engineer for Southeast Asian Retail explained: Siam Counter Holdings moved to the WF-P family after the previous supplier changed eMMC parts mid-contract, and 69700 boards into the Vienna estate have held one frozen BOM.

Field Report: flagship store checkout and media wall installation

LONGGANG, September 23, 2026 - Jin Tao, AndroidSBC field desk. On the Austria configuration the WF-P3399 ran kiosk-mode lockdown with a single merchant app, and the watchdog recovered the lane after each simulated mains dip. The WF-P3399 POS Android motherboard order for Vienna, Austria cleared the burn-in station on schedule and is en route via the Hamburg - Shenzhen lane.

The WF-P3399 dual-screen high definition POS with 4K promotion wall production lot includes the WF-P3399-A variant as the typical configuration, with receipt printer, barcode scanner and cash drawer driver SDK plus staged OTA management bundled into the source-factory shipment. For Austria integrators, the TKK / RTR conformity plus CE marking with the Austrian radio interface notification paperwork is bundled.

Filed by Jin Tao, AndroidSBC field desk, LONGGANG. Austria integrators typically request CE plus local radio interface notification for POS board deployments.

WF-P3399 Application Scenarios

The WF-P3399 dual-screen high definition POS with 4K promotion wall sits inside a twelve-variant WF-P POS Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-P3399-A configuration is the typical build for the flagship store checkout plus media wall use case, with receipt printer, scanner and cash drawer driver SDK plus staged OTA management bundled.

• Supermarket and hypermarket checkout: the WF-P3399 drives the cashier screen while the second lane carries the customer display or the promotion wall in Vienna.
• Convenience and small format stores: the WF-P7600 fits a narrow counter with a receipt printer, a barcode scanner and a cash drawer on one board.
• Restaurants and quick service: the WF-P7601 runs the order screen plus a kitchen display output, with the customer display showing the order total.
• Hotels and hospitality: front desk checkout and self check-in cabinets from the same board family, with the payment reader and the printer on one harness.
• Unattended retail and vending: the WF-P7602 holds a 7x24 duty cycle in a cabinet with no staff to reset it.
• Fuel forecourts and parking: the WF-P3600 runs the outdoor payment cabinet, where the wide temperature window and the watchdog matter more than raw CPU.
• Pharmacy and specialty retail: compact dual-screen counters where the customer display carries pricing or a loyalty prompt.
• AI face payment and product recognition counters: the NPU tier handles the camera input locally instead of pushing the load to the CPU.
• Retrofit programmes in Vienna: the same board re-uses the existing enclosure, panel and counter harness, so an installed estate can be upgraded lane by lane.

Partnership Models for Vienna Buyers

For Vienna and Austria buyers the question is rarely which board, it is which relationship. Three tracks cover the answers.

• Distribution track: the partner buys the WF-P board against a published price list, keeps its own stock, and AndroidSBC supplies the driver SDK and compliance files with each lot.
• Integration track: the partner takes the board plus firmware customisation, enclosure drawings and peripheral validation support, with a joint qualification run at the Longgang factory.
• Private-label track: the WF-P board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed BOM held for the length of the agreement.

Entry to any of the three tracks starts with a sample batch and a peripheral validation run, and Austria partners usually convert within one quarter.

Frequently Asked Questions

Does the WF-P POS Android motherboard family support a dual-screen high definition POS with 4K promotion wall?

Answer: Yes. The dual-screen high definition POS with 4K promotion wall is a stock configuration on the WF-P POS Android motherboard family from AndroidSBC. All tiers are validated against the same firmware build and the same peripheral interface before shipment to Vienna.

Which silicon tiers are available in the WF-P family for Austria buyers?

Answer: RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618 and T527 are all in production. The RK3399 tier specified here is validated for Austria compliance with the same evidence pack as the rest.

Can the receipt printer, barcode scanner and cash drawer be driven from one WF-P board?

Answer: Yes, and the configuration is documented per lot. The Vienna partner receives the interface map and the validation report with the shipment, so the counter can be wired without trial and error.

What is the minimum order quantity and the sample lead time for Austria?

Answer: The sample MOQ is one unit with a 1-3 day lead. For volume, Vienna partners work against a published price list with a 15-30 day production lead, and the BOM is frozen per lot.

Is custom ROM, boot logo or pre-installed app development available?

Answer: Available on all three tracks. AndroidSBC does AOSP builds, BSP porting, custom boot animation, custom logo and pre-installed apps, with the result held as the Vienna partner reference image.

How are firmware updates delivered to aan Austria estate after deployment?

Answer: Updates go out through the staged OTA channel bundled with the driver SDK. The Vienna partner can hold lanes, pilot on ten, and revert any wave that misbehaves.

What shipping terms does AndroidSBC support for Austria orders?

Answer: All three standard terms are available - FOB Shenzhen, CIF to the destination port, or EXW for partners with their own consolidator. Export customs clearance is handled by AndroidSBC.

What happens if a board fails in the field in Austria?

Answer: AndroidSBC holds service stock for Vienna partners on a frame agreement, so a failed board is replaced from that stock while the root-cause analysis runs in parallel.

Contact AndroidSBC: Start Your WF-P3399 Sourcing Conversation

AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels for the WF-P family. Vienna integrators can reach the export desk through:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

For Vienna and Austria buyers the sample lead is 1-3 days and the mass-production lead is 15-30 days. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window.