POS Board Dual-Screen Same Display for Restaurant Till, WF-P3600, AndroidSBC, Vienna

TL;DR: POS Board Dual-Screen Same Display for Restaurant Till

AndroidSBC sourcing desk: dual-screen POS board pricing held flat through the current quarter serving Vienna, Austria. The WF-P3600 POS Android motherboard spans the dual-screen cash register with printer and cash drawer and eleven sister models in the WF-P series, all built on the RK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoC with the ARM Mali-G52 2EE GPU, dual LVDS output at 1080p plus 60Hz, and Android 12 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-P family from the Longgang source factory in Shenzhen to Vienna and Austria importers who run supermarket checkout lanes, convenience counters, restaurant tills, hotel front desks, fuel forecourt cabinets and unattended payment kiosks.

About AndroidSBC and the POS Android Motherboard Family

Wanlin Manufacturing Group has been shipping Android boards out of Shenzhen for years, and the WF-P POS line is the branch aimed at checkout and payment counters. AndroidSBC publishes the price list, the MOQ and the lead time up front, because Austria importers comparing three Chinese factories need numbers they can put into a spreadsheet. Each production lot is burned in for 72 hours with the display, the touch panel and the printer loop running, and the serial number is logged against the test record so a Vienna partner can trace a single board back to its run.

WF-P3600 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-P3600 (dual-screen cash register with printer and cash drawer) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Austria importers sourcing the WF-P family, the WF-P3600-A variant is the typical configuration for the restaurant counter cash register rollout use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing POS Android Motherboards for Austria Buyers

Payment certification is the third wall. EMV, PCI PTS and the local acquirer kernel all sit between a working prototype and a lane that can take a card, and Vienna integrators routinely lose months to a board vendor who has never seen a kernel test plan.

The thermal question is handled at the board level rather than in the enclosure. The WF-P tier chosen for Vienna is specified for fanless 7x24 counter duty with a hardware watchdog and a scheduled power cycle, and the burn-in record that accompanies the lot is run at the top of the temperature window rather than at 25C. For the Vienna programme the milestone landed on September 23, 2026: 44800 boards shipped on the Hamburg - Shenzhen lane, seven-year firmware window committed on the whole WF-P family.

Competitive Comparison: WF-P3600 vs Competing POS Android Boards

The boards competing with the WF-P family in Austria tend to be single-platform designs. That is the root of three of the four differences below.

• Platform breadth: twelve models on eight chips (RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618, T527), so {city} integrators can move between tiers without changing the driver stack or the mounting pattern.
• Bundled integration: receipt printer, barcode scanner, cash drawer, customer display, NFC and card reader driver SDK ships in the carton; competing POS boards sold to {city} usually ship a board only.
• Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the {city} integrator to obtain.
• Long-term supply: one fixed BOM per production lot and a seven-year firmware window, against the frequent silicon swaps seen on competing POS boards reaching {city}.

Global POS Terminal and Smart Checkout Market Trends

Within the Austria market the fastest-moving segment is the smart Android terminal that replaces a cash register outright. The dual-screen cash register with printer and cash drawer sits directly in that segment: a merchant is not buying a card reader, they are buying the counter.

• Entry counter tier: WF-P3600 covers single-screen checkout and small format stores, where the brief is a reliable 1080p panel, a receipt printer and a cash drawer on one board.
• Dual-screen mainstream tier: WF-P1330 drives the cashier screen and the customer display independently, which is the configuration most restaurant and supermarket rollouts standardise on.
• AI and unattended tier: WF-P6180 carries the NPU, the wide temperature window and the watchdog behaviour that face payment counters and outdoor cabinets require.

What a Vienna integrator should take from the forecasts is that the second and third batches matter more than the first. The WF-P family is specified so the second batch is the same board.

Partner Success Story: Siam Counter Holdings (convenience and pharmacy POS integrator)

The Siam Counter Holdings case in the Southeast Asian retail segment is a working example of how the WF-P family from AndroidSBC supports Vienna integrators. Siam Counter Holdings rolled out 44800 WF-P boards across 210 convenience and pharmacy counters.

• OEM relationship: AndroidSBC private-label SKU shipped with Siam Counter Holdings branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3576 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering thermal printer, receipt printer, barcode scanner, QR scanner, cash drawer, customer display, NFC reader, RFID reader, magnetic stripe reader, IC card reader, PIN pad, fingerprint reader and face recognition camera.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus TKK / RTR conformity, all bundled into the Shenzhen source-factory shipment.

As Siam Counter Holdings Chief Engineer for Southeast Asian Retail put it: Siam Counter Holdings moved to the WF-P family after the previous supplier changed eMMC parts mid-contract, and 44800 boards into the Vienna estate have held one frozen BOM.

Field Report: restaurant counter cash register rollout

BAOLONG, September 23, 2026 - Ling Yun, AndroidSBC field desk. The dual-screen cash register with printer and cash drawer pilot in Austria used the WF-P3600 with 4G fallback, because several counters sit where fixed-line connectivity is unreliable. The WF-P3600 POS Android motherboard order for Vienna, Austria cleared the burn-in station on schedule and is en route via the Hamburg - Shenzhen lane.

The WF-P3600 dual-screen cash register with printer and cash drawer production lot includes the WF-P3600-A variant as the typical configuration, with receipt printer, barcode scanner and cash drawer driver SDK plus staged OTA management bundled into the source-factory shipment. For Austria integrators, the TKK / RTR conformity plus CE marking with the Austrian radio interface notification paperwork is bundled.

Filed by Ling Yun, AndroidSBC field desk, BAOLONG. Austria integrators typically request CE plus local radio interface notification for POS board deployments.

WF-P3600 Application Scenarios

The WF-P3600 dual-screen cash register with printer and cash drawer sits inside a twelve-variant WF-P POS Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-P3600-A configuration is the typical build for the restaurant counter cash register rollout use case, with receipt printer, scanner and cash drawer driver SDK plus staged OTA management bundled.

• Supermarket and hypermarket checkout: the WF-P3600 drives the cashier screen while the second lane carries the customer display or the promotion wall in Vienna.
• Convenience and small format stores: the WF-P5270 fits a narrow counter with a receipt printer, a barcode scanner and a cash drawer on one board.
• Restaurants and quick service: the WF-P7600 runs the order screen plus a kitchen display output, with the customer display showing the order total.
• Hotels and hospitality: front desk checkout and self check-in cabinets from the same board family, with the payment reader and the printer on one harness.
• Unattended retail and vending: the WF-P7601 holds a 7x24 duty cycle in a cabinet with no staff to reset it.
• Fuel forecourts and parking: the WF-P7602 runs the outdoor payment cabinet, where the wide temperature window and the watchdog matter more than raw CPU.
• Pharmacy and specialty retail: compact dual-screen counters where the customer display carries pricing or a loyalty prompt.
• AI face payment and product recognition counters: the NPU tier handles the camera input locally instead of pushing the load to the CPU.
• Retrofit programmes in Vienna: the same board re-uses the existing enclosure, panel and counter harness, so an installed estate can be upgraded lane by lane.

Partnership Models for Vienna Buyers

The WF-P family is offered on distribution, integration or private-label terms, and a Vienna partner can run more than one at a time.

• Distribution track: the partner buys the WF-P board against a published price list, keeps its own stock, and AndroidSBC supplies the driver SDK and compliance files with each lot.
• Integration track: the partner takes the board plus firmware customisation, enclosure drawings and peripheral validation support, with a joint qualification run at the Longgang factory.
• Private-label track: the WF-P board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed BOM held for the length of the agreement.

Every track is open to Vienna importers, distributors, system integrators and brand owners, with the same 1-3 day sample lead.

Frequently Asked Questions

Does the WF-P POS Android motherboard family support a dual-screen cash register with printer and cash drawer?

Answer: Yes. dual-screen cash register with printer and cash drawer is built into the WF-P family as a standard configuration, and the Vienna pilot batch ships with that configuration already loaded and tested.

Which silicon tiers are available in the WF-P family for Austria buyers?

Answer: Eight tiers are available: the Rockchip RK3576 on 8nm, the RK3568 and RK3566 on 22nm, the RK3288 and RK3399 on 28nm, and the Allwinner A133, H618 and T527. The RK3568 tier is the one specified for this configuration.

Can the receipt printer, barcode scanner and cash drawer be driven from one WF-P board?

Answer: Yes. A single WF-P board drives the thermal or receipt printer, the barcode or QR scanner, the cash drawer on RJ11 or RJ12, and the customer display, with all drivers bundled in the source-factory shipment.

What is the minimum order quantity and the sample lead time for Austria?

Answer: AndroidSBC takes single-board sample orders with a 1-3 day lead, then a 15-30 day mass-production lead on bulk orders. The MOQ for private-label work is agreed per SKU.

Is custom ROM, boot logo or pre-installed app development available?

Answer: AndroidSBC supports custom Android AOSP builds, Linux BSP porting, boot logo and animation work, pre-installed apps and custom UI, and locks the result as the production image.

How are firmware updates delivered to aan Austria estate after deployment?

Answer: Updates are delivered through a staged OTA channel: the Vienna partner pilots on a small group of lanes, holds the rest, and rolls back the image if the pilot shows a regression.

What shipping terms does AndroidSBC support for Austria orders?

Answer: AndroidSBC supports FOB Shenzhen, CIF and EXW pricing, and books the shipping lane against a production slot so the Vienna delivery date holds.

What happens if a board fails in the field in Austria?

Answer: The warranty path starts from the serial number. The Austria partner files the RMA, AndroidSBC traces the lot and the test record, and a replacement ships on the same configuration.

Contact AndroidSBC: Start Your WF-P3600 Sourcing Conversation

AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels for the WF-P POS board family. Vienna integrators can reach the export desk through:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

A 1-3 day sample lead applies to Austria buyers and a 15-30 day mass-production lead to bulk orders. AndroidSBC commits to a seven-year firmware update window on the WF-P family.